- 37 -
If keeping the above mentioned distance is impossible, apply appropriate safety
measures (e.g. heat-
resistant foil), which will ensure keeping the wall’s temperature
within the safe range.
Place the device so that the plug is easily accessible so as to quickly disconnect the
device if the need arises.
Before the first use, remove the protective foil from the device. Remove the foil slowly
not to leave glue residues. Remove possible glue residues with appropriate solvent.
CAUTION!
Never remove the type plate and warning signs from the device.
Connection
DANGER! Electric shock hazard!
The device can cause injuries due to improper installation!
Before installation and connecting the local power grid
specification should be compared with that of the device
(see rating plate). Connect the device only in case of
compliance!
The power supply circuit with the socket must be protected by the fuse of at least 16A.
Connect the device directly to a single grounded socket. Do not use any power bar or
multiple socket.
5.2 Operation
5.2.1 Preparation of the device
Before the first use, pre-heat the device without any food to remove any production
residues. To do so, turn the temperature knob to its highest position of 250 °C and
the time knob to 60 minutes. Follow the instructions included in section
5.2.4
“Setting“
.
In this time, fumes or unpleasant odour may be released from the convection oven
and that is why the room where the oven is located should be provided with
ventilation.
