Possible Malfunctions
26 / 28
300749
EN
7
Possible Malfunctions
Mögliche
The table below contains descriptions of possible causes and solutions to
malfunctions or errors during operation of the appliance. When malfunction cannot
be removed, contact the technical service.
In such a case, provide article number, model name and serial number. These data
may be found in the rating plate.
Problem
Possible Cause
Solution
Appliance does not
work
No power
Check and restore the electric
power supply
Appliance is not
connected to the
power supply
Insert the plug into the mains
socket
Damaged connection
cable
Contact the service company
ON/OFF switch is not
pressed
Make sure that the ON/OFF switch
has been pressed properly.
Appliance does not
produce full
vacuum in a
vacuum packaging
bag
Open end of a vacuum
packaging bag is not
located entirely in the
vacuum chamber
For the proper sealing to be
possible, the open end of the
vacuum packaging bag must
remain entirely in the vacuum
chamber.
Time of air evacuation
has not been set to a
period long enough
Extend the air evacuation period
A vacuum packaging
bag may feature a hole
To check this, seal a vacuum
packaging bag with a bit of air
inside, submerge it under water
and press. Air bubbles indicate lack
of tightness. Reseal the vacuum
packaging bag or use another
vacuum packaging bag
Summary of Contents for K 290/77L
Page 1: ...K 290 77L 300749...
