Installation and operation
114367
15 / 20
EN
Before Use
1. Before use, clean the appliance according to the indications provided in section
6.
“Cleaning”
.
2. Place an appropriate cookware with food on the heating plate.
ATTENTION: Do not leave an empty cookware on the induction heating
plate, as this may lead to damage to the appliance.
Appliance Start-up
1. Plug the appliance into a suitable single grounded socket.
2. Press the ON/OFF switch on the control panel to switch the appliance on.
The power indicator light in the ON/OFF switch is lit.
The digital display shows
“- - -”
.
NOTE: If the appliance is emitting audible signal, the used cookware is not
suitable for induction or the appliance is damaged.
3. With arrow buttons on the control panel set the temperature in the range of 40°C
– 100°C, in increments of 5°C.
The set temperature will be shown in the digital display.
Switching the Appliance Off
When the intended effect is obtained or when the appliance will not be used, switch
it off with the ON/OFF switch.
Summary of Contents for IW10-EB
Page 1: ...IW10 EB 114367...
