- 32 -
Problem
Cause
Removal
Heating element ceases
functioning after some
time.
•
Overheating control has
activated
•
Press RESET on the
switching device
The above mentioned trouble cases are just exemplary and to give you orientation.
Should these or similar troubles occur, please switch off the device and stop use
immediately. Contact qualified technicians or the manufacturer for inspection and
repair.
8. Waste disposal
Discarding old devices
At the end of its service life the discarded device has to be disposed in
accordance to
the national regulations. It is advisable to contact a company which is specialized in
waste disposal, or just contact the local disposal service in
your community.
WARNING!
To exclude any abuse and the dangers involved make the waste device unfit for
use before disposal. For that purpose disconnect device from mains supply and
remove mains connection cable from the device.
NOTE!
For the disposal of the device please consider and act
according to the national and local rules and
regulations.
Stale oil
Please remove used frying oil in accordance with all applicable environmental
protection regulations.
Bartscher GmbH
Franz-Kleine-Str. 28
D-33154 Salzkotten
phone: +49 (0) 5258 971-0
Germany
fax: +49 (0) 5258 971-120
