Installation and operation
14 / 16
300323
EN
– now, connect the appliance to a power source.
Replacement of Adhesive Films
NOTE!
Due to hygienic reasons, replace the adhesive film in regular intervals.
When replacing, follow the instructions:
– remove the lampshade and remove the adhesive film;
– place a new adhesive film and remove the protective film;
– fix the lampshade anew on the holder with the lamp fitting;
– switch the appliance on as usual.
Switching the Appliance Off
1. If the appliance is not to be used, disconnect the appliance from the power
supply (pull the plug out).
Storing the Appliance
1. If the appliance is to remain unused for a prolonged period of time, remove the
used adhesive film from the appliance.
2. Clean the appliance observing indications in Section 6
'Cleaning'
.
3. Store the appliance in a dry, clean place, not subject to frost nor direct sunlight,
and away from the reach of children. Do not place any heavy objects on the
appliance.
Summary of Contents for IF-92
Page 1: ...IF 92 300323...
