Installation and operation
12 / 16
300323
EN
7. Place the delivered adhesive film in
the lampshade so that it is clamped
behind the tab at the bottom area.
8. Remove protective film from the
adhesive film.
Fig. 4
9. Hang the lampshade on the
designated hook on the holder.
10. Pay attention how the cord is routed;
pull the power cord through the
opening in the lampshade.
Fig. 5
Power supply connection
• Verify if technical data of the appliance (see rating plate) correspond with the
local electric power grid specification.
• Connect the appliance to a single, properly grounded mains socket with
protective contact. Do not connect the appliance to a multi-socket.
• The power cord should be laid in a way preventing anyone from threading on it
or tripping against it.
Summary of Contents for IF-92
Page 1: ...IF 92 300323...
