- 34 -
Glass panels are pre-heated, which should prevent accumulation of condensed water
when placing food in the hot display.
In the meantime, prepare required
warm food
and fill the supplied GN 1/3 containers
with the food.
Open the sliding glass door from
the hot display operator side and
place the GN containers with food
onto the surface designed for
placing the GN containers.
Close the sliding glass door of the
hot display to limit temperature loss.
The food will be kept warm in
selected temperature.
Remove the required food from the operator side and serve.
When the temperature in the hot display falls down, the heating-up is on again and
the heating-up orange indicator is on again.
When the device is no longer in use, turn it off using
ON/OFF
switch and disconnect
from the power supply (pull the plug!).
The device is provided with 2 safety thermostats:
1.
Automatic reset thermostat
turns the device off in case of overheating (above
125 °C). In such a case, disconnect the device from the electric power supplly
and leave it to cool down. When it has cooled down, you can start using the
device as usual.
2. When the automatic reset thermostat is damaged and the device overheats,
the
2nd safety thermostat
turns on at 150 °C and it switches off the device.
In such a case, contact the customer service or vendor.
