12
ENGLISH
GB
8.5.
Check-up (service technician)
Before starting the appliance the installation
check-up should be run to evaluate the working
conditions of every single component and
recognize any errors.
It is recommended to run the following check-ups:
1.
Check that the energy supply voltage is the
same as of the appliance voltage.
2.
Turn on the automatic switch-off to check the
electrical connections.
Check that the protection devices work correctly.
9. SETTINGS
There are no special default settings of the
device.
The only settings are those set up by the user
while using the device.
10. APPLIANCE DISPOSAL
The appliance is marked in conformity
with the European Directive 2002/96/EG
WASTE ELECTRICAL AND ELECTRONIC
EQUIPMENT (WEEE).
By disposing the appliance in
accordance with the regulations the
user contributes towards prevention of
adverse effects on environment and
health.
The
symbol on the product or
attached manual indicates that the product cannot
be considered as ordinary household waste and
should be transferred to a special collection point
for electrical and electronic appliances for
recycling.
Local waste management regulations should be
observed.
Further information on procedure, reusing and
recycling of the product is available in local
offices, waste management unit or with the
product sales agent.
Bartscher GmbH
Franz-Kleine-Str. 28
D-33154 Salzkotten
phone: +49 (0) 5258 971-0
Germany
fax: +49 (0) 5258 971-120
Summary of Contents for FTE91MA0
Page 15: ...ANLAGEN ATTACHMENTS ANNEXES ALLEGATI ANEXOS ANEXOS BIJLAGEN ZA CZNIKI...
Page 20: ...NOTE...
Page 21: ...NOTE...