background image

 

 

 

- 20 - 

 

 

Only a qualified technician and using original spare parts and 
accessories should carry out repairs and maintenance of the 
device. 

Do not attempt to repair the device yourself.

 

 

Do not use any accessory or spare parts that have not been 
recommended by the manufacturer. These can be dangerous 
for the user or lead to damages of the device or personal injury, 
and further, the warranty expires. 

 

To prevent hazards and to ensure optimum efficiency, no 
modifications or alterations to the device that are not explicitly 
approved by the manufacturer may be undertaken. 

 DANGER! Electric shock hazard! 

To avoid the hazard results please follow the safety instructions 
below. 

 

 

Never allow the power cable to come into contact with heat 
sources or sharp edges. The power cable should not hang over 
the side of the working surface. Ensure that no one can step on 
or trip over the cable. 

 

The power cable must not be folded, bent or tangled, and must 
always remain fully unrolled. Never place the device or other 
objects on the power cable.  

 

Do not lay the power cable over carpets or other inflammable 
materials. Do not cover the cable. Keep away the cable from 
operating range. 

 

Check the power cord regularly for damage. Do not use the 
device if the power cord is damaged. If this cable is damaged, it 
must be replaced by customer service or a qualified electrician in 
order to avoid dangers. 

Summary of Contents for Compact Ice K


















Reviews: