- 27 -
Locate the device so that sufficient air circulation is ensured. Keep a distance of
at least 10 cm at the sides and rear from walls and other objects.
Never place the device in locations with high ambient humidity. Too much moisture
may damage the device.
Position the device in such way that the plug is easily accessible for quick
disconnecting when required.
Connection
DANGER! Electric shock hazard!
The device can cause injuries due to improper installation!
Before installation and connecting the local power grid
specification should be compared with that of the device
(see rating plate). Connect the device only in case of
compliance!
If the ice cube maker is kept outside during the winter and then taken inside for use,
please let it warm up to room temperature before plugging it in.
Let the cooling agent settle for two hours. Only then plug in the device.
In the event of a power outage or if the device is unplugged, do not reconnect the
device to the power network for at least 5 minutes.
The electrical circuit in the socket must be secured to at least 16A. Only connect the
device directly to the wall socket; do not use any extension cords or power strips.
5.2 Operation
Before first use
Before using the device for the first time, clean it (see
6
„Cleaning and descaling“
).
Carry out 2 - 3 ice cube making cycles according to the description presented below.
CAUTION!
For reasons of hygiene, throw ice cubes from the first 2 - 3 cycles away
and do not use them to prepare drinks or cool foodstuff.
