40
Attaching the drip tray
The drip tray is used to collect liquids which
may flow out through the front door of the
oven. Place the tray in front of the oven and
fasten it with screws found in a bag provided
in the package. The screws are screwed into
the threaded inserts in the lower front part of
the oven (Figure on the right).
Attaching the drip tray drain
Fit a plastic closure and a white water drain
hose which is found in the package. Make
sure that the hose is installed and fixed in
such a way as to allow the water to properly
drain from the drip tray to the sewage network
(Figure on the right).
5.1.4
Power supply connection
WARNING! Danger of electric shock!
In the case of improper installation the device may cause injuries!
Before the installation compare the local power grid parameters with the
parameters of the oven power supply (see the nameplate). The oven can be
powered only when these data are consistent!
Before connecting to the power grid, make sure that the voltage and frequency
indicated on the nameplate correspond with those of the local power grid.
The allowable deviation in voltage is ± 10%.
When the device does not have wheels to facilitate its movement we recommend to
connect the device to the power supply first, and then position it in its workplace.
