- 30 -
The device is equipped with an overheating protection. It switches off the device
in case of overheating. When triggering the overheating protection disconnect the
device from the socket (pull the power plug!) and allow cooling.
Remove with a screwdriver the plastic protective cap on the
back side of the appliance (underneath the label RESET) and
press the RESET pin.
Should the overheating protection trigger repeatedly within a
short time, notify the customer service.
Fat collecting pan
•
At the front side of the lower grill plate there is located the fat collecting pan which
collects the outflowing vegetable fats and animal remains fats.
CAUTION!
Never operate the appliance without the fat collecting pan inserted properly.
•
During the grilling process the grill juices
and fat flow in the fat drain channel (9)
through the opening (9a) into the fat
collecting pan (8).
•
Check and empty the fat collecting pan (8)
regularly. Clean them if necessary, dry
them and insert it again in the device.
•
Before cleaning always allow the device,
the fat collection pan and the contents to
cool completely.
Instructions for preparation of food
•
The contact grill is intended for careful preparation of food with little addition of fat.
•
Before you lay the desired food, give a little oil on the lower grill plate. At the best
use the oil with a high smoke point, such as rapeseed or sunflower oil.
•
Meat, bacon, etc. require very little oil, because they contain their own fat; when
grilling fish or vegetables you should give a little more oil to the lower grill plate.
The addition of oil reduces sticking or burning of food on the grilling surface.
9
8
9a
