Installation and operation
A120788
17 / 28
EN
Rules for cooking/roasting
Cooking/roasting in the convection oven with fan-forced air circulation
Cooking/roasting process is effected with the use of hot air circulation inside the
appliance. This makes homogeneous cooking/roasting possible thanks to uniform
temperature distribution.
The benefit of the convection oven is the fact that you may cook/roast various foods
(provided the temperature of processing is the same), and different aromas of the
foods do not mix.
NOTE:
Prior to each use, heat the convection oven properly. Set the temperature
approx. 30°C above the required temperature and correct it when food is
put into the oven in order to obtain uniform effect.
1. Switch the appliance on with the use of the main controller/time controller (rotate
it clockwise and set the required cooking/roasting time).
The green operation indicator light lights up, the internal lighting and fan motors
start right after the main controller/time controller is operated.
2. Set the desired temperature within the range of 50 °C
– 300 °C with the
temperature controller.
The green heating indicator light will be on.
As soon as the set temperature is reached, the green indicator light goes off and
lights up again, when the temperature in the oven chamber drops.
3. When the set temperature is reached, put the food products in suitable
containers or on oven sheets for baking/roasting into the oven chamber of the
convection oven.
You can place 4 oven sheets on 4 bearing rails of the convection oven at a time.
When filling the appliance with food products, make sure that there is a top
clearance of at least 40 mm between dishes and oven sheets, which will allow for
maintaining optimum heat distribution in the oven chamber.
When the set time has elapsed, an audible signal will be heard, the green operation
indicator light goes off and the appliance switches off automatically.
4. Remove the prepared food from the oven.
5. When the appliance is not to be used any more, switch it off (rotate the main
controller/time controller to '
0
' position). Disconnect the appliance from the
mains socket (pull the plug out).
Grilling process with power setting
Summary of Contents for A120788
Page 1: ...AT120 A120788 ...
