- 35 -
7. Possible Malfunctions
In case of malfunction, disconnect the device from its power source. Before contacting
the service or sales agent, verify - based on the table below - whether it is possible to
eliminate disruption in operation.
Malfunction
Cause
Solution
No cooling
Loss of coolant.
Damaged temperature
controller.
Contact the sales agent.
Contact the sales agent.
Insufficient
cooling capacity.
Device is too close to source
heat or direct sunlight.
Poor air circulation around the
device.
Improperly closed door or the
door was left open too long
Damaged or deformed door
sealing.
Insufficient distances between
the stored products or
overfilled device.
Blocked air inlet and/or outlet.
Ensure sufficient distance
between the device and heat
sources.
Ensure sufficient distance
from walls and other objects.
Close the door and shorten
the time of its opening
Contact the sales agent.
Ensure sufficient distance
between products and
remove excess food products.
Do not block air inlet and
outlet.
Device emits
loud sound.
Device is placed on an
uneven surface.
Device is touching the wall
or other objects.
Place the device on an even
surface.
Ensure sufficient distance
from the wall and other
objects.
The compressor
does not start
automatically
Overfilled device.
The door was opened
too long.
Remove excess food
products.
Minimize the door opening
time.
If you cannot remove the malfunctions:
-
do not open the body,
-
notify the customer service point or contact the sales
agent, while providing the following information:
type of malfunction;
article and serial number (rating plate at the
rear of the device).
