- 30 -
Do not
place the device in the vicinity of open fire, electric ovens, heating furnaces,
or other heat sources like direct sunlight. High temperature may damage the device
surface and may impact the cooling capacity and energy consumption.
When placing the device, make sure that the ambient temperature is in the
range from 10 °C to 32 °C.
Place device so that there is sufficient air circulation around the device. Keep a
distance of at least 10 cm from the walls and other objects.
Never
cover or block ventilation ducts or air inlet and outlet.
Do not
place the device in the area with high humidity. Relative humidity at the
location of the device shall not exceed 70 %. Excessive humidity may affect the
cooling power of the device.
Do not drill any holes and do not mount any other objects in the device or on the
device.
Do not place heavy objects on the device.
Place the device so that the plug is easily accessible in order to quickly disconnect
the device from the power source if necessary.
Connection
DANGER! Electric shock hazard!
The device can cause injuries due to improper installation!
Before installation and connecting the local power grid
specification should be compared with that of the device
(see rating plate). Connect the device only in case of
compliance!
Before the first use, the mini cooler should be installed and left standing for at least 2
hours before it is connected to the power supply.
After a power failure or removal of the plug, do not reconnect the device to the
power supply for at least 5 minutes.
The power supply circuit with the socket must be protected by the fuse of at least 16A.
Connect the device directly to a single grounded socket. Do not use any power bar or
multiple socket.
