19/199
GENERAL WARNINGS
Read the instructions carefully before installation, use and maintenance of the appliance.
The installation has to be performed by qualified personnel following the manufacturer’s
instructions given in the provided manual.
The appliance is only suitable for the preparation and cooking of food in industrial kitchens
such as those used in restaurants, hospitals, company canteens, cooking centres, butcher’s
shops and food production firms. Any other type of use is not in accordance with the intended
purpose and could place people and/or objects at risk.
The appliance should only be used by trained personnel and for the use for which it was
designed.
Due to the nature of the appliance, the temperatures required for cooking may cause various
areas of the panelling, as well as kitchenware, to become hot. This is not a construction defect,
but a physical phenomenon caused by the chemical and physical properties of the materials
used for the construction of the appliances.
In the event of breakdown or malfunction, switch off the appliance and seek help exclusively
from an authorized technical assistance centre.
Only use genuine spare parts; otherwise no liability is assumed by the manufacturer.
The appliance must not be washed with high pressure water sprays and the vents or
inlets/outlets for air, fumes and heat must not be obstructed.
Children should be supervised to ensure they do not play with the appliance.
Before connecting the device make sure that the plate specifications correspond to the electrical
and gas supply.
When cooking, avoid placing pots and pans and/or crockery on the hotplate that could partially
cover the stainless steel part of the hob, otherwise the worktop may overheat.
When not in use, make sure the appliance is disconnected from the electric mains.
ATTENTION! The manufacturer declines any liability for damage caused by wrong
installation, tampering, making unauthorized changes, improper use, poor maintenance,
installation of non-original spare parts, not observing local norms, incorrect use or not
observing the instructions in this booklet.
For the installer
The functioning of the appliance has to be explained and shown to the user. After ensuring that
everything is clear, the instruction booklet has to be handed over to the user.
The user has to be informed that any building modification or restructuring that may in any way
modify the air supply necessary for combustion makes it necessary to carry out another check of
the functionality of the appliance. In particular, every variation (additional power) in the
appliances in the room may modify the balance of the gas supply in the room. That means that
appliances may be fed with gas at lower gas pressure and rate than those provided for and they
may give worse performance.
TECHNICAL FEATURES
The following instructions for set up and functioning refer to gas and mixed appliances belonging to
categories I
2H,
I
3P,
I
3B/P
, II
HS3B/P,
II
2E3PB/P
II
2H3+
, II
2H3B/P
,
with a power pressure for Butane/Propane
(G30-G31) of 30/50 mbar and Methane (G20) of 20 mbar. The DATA PLATE showing all the
appliance information is to be found inside the right or left side of the control panel, depending on
the model.
