background image

 

 

 

 

- 20 - 

3. Transport, packaging and storage 

3.1 Delivery check 

 

Please check the delivery upon completeness and transport damage immediately after 
receipt. 
In case of visible damage do not accept or accept the delivery with reservation only.  
Note the extent of damage on the carrier’s bill of delivery. Trigger off the complaint. 
Hidden damages should be reclaimed immediately after notice, as claims for damages 
can only be asserted within the effective period for complaints. 

 
 

3.2 Packaging 

 

Please do not throw away the covering carton of your device as it might be useful for 
storage purposes, when moving or, in case of damages, when the device must be sent 
back to a repair center. The outer and inner packing material should be removed 
completely from the device before installation. 

NOTE! 

If you liked to dispose the packing, consider the regulations applicable in your 
country. Supply re-usable packing materials to the recycling. 

Please inspect the device upon completeness. In case any part is missing please 
contact our customer service center immediately. 

 
 

3.3 Storage 

 

Keep the package closed until installation and under consideration of the outside 
indicated positioning- and storage markings. 
Packages should be stored under consideration of the following: 

 

 

-

 

Do not store outdoors. 

-

 

Keep it dry and dust-free. 

-

 

Do not expose it to aggressive media. 

-

 

Do not expose it to direct sunlight. 

-

 

Avoid mechanical shocks and vibration. 

-

 

In case of longer storage (> 3 months) make sure you check the state of the 

packaging and the parts regularly. If required refresh or renew. 

 
 

www.food-service.com.ua

Summary of Contents for 700.075H















Reviews: