8 / 12
500308
EN
3. Align the bottom opening of the handle with opening in the connection plate (7),
which is already assembled at the bottom of the frame. Insert the short stud (8)
and secure it with C clamp. To place the C clamp on the stud and fix the stud,
use tweezers with slim tips and press the clamp until it engages.
Table-Top Mounting
You may set and mount the chip cutter to the table-top with suitable rubber fee (
not
part of the deliver
).
1. Fix the rubber feet (example shown in
the Figure) in the frame openings, using
suitable nuts.
2. Then set the chip cutter in a selected
location and press it down for the
rubber feet to suck well to a table-top.
Fig. 7
Wall Mounting
Another possibility for mounting the cutter in manner safe for a user is wall
mounting.
1. Before mounting the chip cutter on a wall, check the parameters of a wall where
the cutter is to be installed.
ATTENTION!
Do not mount the chip cutter on drywalls not on panels.
When mounted on a solid wall surface, such as concrete or stone, you get the
guarantee that the chip cutter will not come loose during operation.
NOTE!
Fixing material is not included in the delivery.
Summary of Contents for 3010
Page 1: ...3010 500308 ...