Bartscher 3010, Original Instruction Manual, Page: 7 / 12

500308 7 / 12
EN
Die/stamp
Potato wedges
Fig. 5
Assembly
Fig. 6
1. Remove C clamp from the long stud (2) at the back of the pusher. Remove C
clamp from the short stud (8), which is located at the free end of the connection
plate (7).
2. Align the middle assembly opening of the handle (1) with openings in the
assembly bracket at the back of the pusher's block; insert the long stud and
secure it with C clamp. To place the C clamp on the stud and retain the stud in
place, use tweezers with slim tips and press the clamp until it engages.