500308
11 / 12
EN
Stamp/Die Replacement
By factory default, there is the 9 mm die and stamp assembled on the appliance's
frame. If needed, they may be replaced at any time with the 6 mm or 13 mm
stamp/die, or with the stamp/die for potato wedges.
When replacing, proceed as described below.
1.
Die:
– remove 2 wing nuts of the die,
– carefully remove the die,
– fit the required die,
– fix the fitted die with the removed wing nuts.
NOTE!
The die is executed with two openings for it to be correctly placed on the
appliance's frame.
2.
Stamp (black):
– manually or with a screwdriver, undo both knurled screws at the back
wall of the connection plate,
– remove the stamp,
– fit the stamp that fits in size with the fitted die,
– use the removed knurled screws to re-tighten the fitted stamp onto the
connection plate.
Summary of Contents for 3010
Page 1: ...3010 500308 ...