- 47 -
Malfunction
Problem
Possible reason
Solution
Fuse is blown at the
start-up
Device connected is
damaged
Check the electric power
supply or whether the
electrical connection was
done properly
Fan is working for a few
minutes after the device’s
switch-off
Cooling of electronic
components
Normal operation
The device does not work,
digital display remains
inactive
No power supply or
damaged electrical
connection
Check the fuses and power
supply circuit switch
“F-” is shown on the digital
display of the device
Check the table
“Information about error
codes” to identify the
problem
If the displayed malfunction
cannot be removed, contact
the service company
The device is not working,
information about “Fx”
error (no heating power)
appears on the digital
display
Incorrect operation of
the electronic power
supply circuits
Disconnect the device from
the power supply and
reconnect again. If this
information is displayed
again and the malfunction
cannot be removed, contact
the service company
After switching the device
on, the set power level on
the digital display is
constantly flashing
The used cooking pan is
not appropriate for
induction cooking
See. section 6.2 “Suitable
cookware”
During cooking, the pots
emit sound
It is a kind of vibration
which appears in the
cooking pots because of
the current flow
For some cooking pots such
a vibration is normal. It is not
dangerous to the device
During first cooking
processes, the device
gives off an odour
Production residues
from the new device
Use the device for half an
hour with the cooking pot
filled in with water
