- 43 -
As soon as the pan is removed from the induction bowl, the displayed power level
starts flashing. This means that there is no cooking pan on the hob.
If the power level indicator flashes when a cooking pan is placed in the induction
bowl, this means that the material of which the cooking pan is made is not
appropriate for induction cooking.
To heat dishes do not use the highest power level, using dishes with non-stick
coating, without the use of oil/fat or with a small amount of oil/fat. Use the highest
20
th
power level only for boiling and deep-frying.
After cooking or warm-keeping of dishes, the device should be switched off,
by turning the control knob to OFF marking and disconnecting it from power
supply.
The device is equipped with overheating protection. In case of overheating
the device, the power level of the device will be gradually reduced, to enable
further operation at lower temperature. If overheating will still be present, the
overheating protection will be triggered and the device will be automatically
switched off.
The digital display shows
„F7“ or „H2“/„H4“.
Remove the cooking pan from the device.
Disconnect the device from the power supply and leave it for a few
minutes to cool off. Afterwards, the device shall operate trouble free.
7. Cleaning
WARNING!
Before cleaning disconnect the device from the power supply.
Let the device to cool down.
The device is not suited for direct washing via water jets.
Protect the device from water penetration.
CAUTION!
Never use sharp or scouring cleaning agents which may scratch the surface
of the device.
Never use any cleaning agents containing petrol or solvents.
