Installation and operation
300800
17 / 24
EN
Temperature Controller / Key Functions and Messages
The temperature controller indicates:
– target temperature of the sealing plate
– current temperature of the sealing plate
– state of the current temperature in comparison to the target temperature
(above, below or equal)
Fig. 6
A
Press this key to switch between the current and target temperature.
B
Press this key to reduce the target temperature.
C
Press this key to increase the target temperature.
SP
Lit = the target temperature is displayed in the digital display
Off = the current temperature is displayed in the digital display
OUT
Lit = the sealing plate is heating up
Off = the sealing plate has reached the target temperature
I
The current temperature is higher (>) than the target temperature.
II
The current temperature equals the target temperature (+/- 5°C)
III
The current temperature is lower (<) than the target temperature.
Summary of Contents for 23180
Page 1: ...23180 300800 ...
