Installation and operation
18 / 24
300800
EN
Settings
After switching the appliance on the digital display shows the current temperature of
the sealing plate.
1. To set the required temperature:
– Press the
A
key. The SP message will be shown.
– Press the
B
key, to reduce the temperature.
– Press the
C
key, to increase the temperature.
2. After setting the target temperature, press the
A
key to confirm the selection.
The SP message goes off.
The OUT message is shown to confirm that the sealing plate is heating up; it is off,
when the sealing plate reaches the target temperature.
Appliance Start-Up
1. Open the lid.
2. Fit the required sealing frame.
3. Plug the appliance into a suitable single socket.
4. Switch the appliance on with the ON/OFF switch.
5. Set the target temperature and confirm the selection.
The recommended temperature is 150 °C.
Follow the instructions in section
'Temperature controller'
.
6. Wait 7
–8 minutes, until the sealing plate reaches the target temperature.
Sealing Lunch Menu Trays
WARNING!
Risk of burns!
During operation and some time afterwards the sealing plate is very hot.
Never touch the sealing plate during operation or immediately after it has
been switched off.
Leave the appliance to cool down completely.
Summary of Contents for 23180
Page 1: ...23180 300800 ...
