Bartscher 16368, Manual

Page: 8 / 36

- 4 -
Carefully clean the vacuum canister and lid.
If the vacuum canister fails to maintain its vacuum, check the condition, cleanliness
and position of seals according to 1a. and 1c. below:
1. Remove the central button (1a.).
2. Remove the entire valve (1), seal (2)
and lid (3).
3. Wash all parts by hand in warm water
with a mild cleaning agent, then rinse
with clean water.
4. Before replacing the lid elements check to ensure that all parts are completely dry.
Replace the valve (1) inside the lid to ensure the seals are located properly (1c.).
Assemble the other parts according to the illustration.
Vacuum packing in the vacuum canister
Place foodstuffs in the
canister, leaving at least
3 cm of free space from
the top edge.
Place the lid on the
vacuum canister. Connect the lid with
the vacuum packing
machine pump via
the hose.
Press the button
labelled „Canister“
on the control panel.
The unit will create a
vacuum inside the
vacuum canister, and
will shut off after the
process is finished. Disconnect the hose
from the vacuum
canister. To open,
press the middle
button on the canister
and open the safety
lock.
The sound of air flowing into the vacuum canister means that the contents have been
properly vacuum packaged.
Bartscher GmbH
Franz-Kleine-Str. 28
D-33154 Salzkotten
phone: +49 (0) 5258 971-0
Germany fax: +49 (0) 5258 971-120
➀
➁
➂ ➃