- 26 -
•
After juicing, lift the juicing arm
①
up and wait for the motor to stop, then remove the
fruit peel. Continue juicing.
•
Remove pulp from the sieve
⑥
when juicing larger amounts of fruit.
WARNING!
When the motor is operating, never reach into the sieve with hands or kitchen
utensils. First, turn the device off via the ON/OFF switch, then wait for it to stop
functioning before removing pulp from the sieve.
•
During juicing, do not press the juicing arm too forcefully. If the motor slows down or
stops, reduce the pressure on the juicing arm.
•
The device is equipped with a thermal security system that deactivates the device
in case it overheats. If this happens, turn the device off via the ON/OFF switch (set to
the position "O") and leave to cool. The device is ready for use after a few minutes.
•
After juicing, turn the device off via the ON/OFF switch (set to the position "O").
ATTENTION!
Remember to remove the device's plug from its socket when it will remain unused
for a longer time or when it is necessary to disassemble its parts.
6. Cleaning and maintenance
6.1 Safety advice
o
Before beginning with repair or cleaning works make sure the device has been
disconnected from power supply and has cooled down.
o
Do not use any acid agents and make sure no water ingresses the device.
o
To protect yourself from electric shock, never immerse the device, its cables and
the plug in water or other liquids.
CAUTION!
The device is not suited for direct washing via water jets.
Therefore, you must not use any kind of pressure water jet for cleaning the device!