- 25 -
•
Replace the parts removed from the unit in the following manner:
connect the cover
②
of the juice container, spacing sleeve
⑬
and header
③
to the squeezing lever
①
using the screw
⑭
by turning it clockwise;
place the juice container
⑦
on the motor housing
⑪
;
insert the sieve
⑥
into the juice container
⑦
;
replace the anti-splatter cover
④
on the juice container;
place the pressing cone
⑤
on the motor drive
⑫.
ATTENTION!
Before activating the device, check to ensure that all parts have been
reassembled properly.
Squeezing fruit juice
•
Place an appropriate container under the
juice chute
⑧
before beginning squeezing
(dia. at right).
•
Prepare citrus fruits (lemon, orange, grapefruit,
pomegranate) by cutting into two halves through
the middle (not lengthwise).
•
Ensure that the ON/OFF switch
⑩
is in the
position "O". Connect the device to an
appropriate single outlet.
•
Place the prepared fruit on the pressing cone
⑤
.
•
Turn the device on via the ON/OFF switch
⑩
by
moving it to the position "I".
•
Pull the juicing arm
①
down, and ensure the
pressing head
③
catches the fruit.
•
Slowly press the juicing arm
①
until the motor begins functioning and the entire
piece of fruit is juiced.
⑧
④
③
①
⑩
②
⑦
⑤