Installation and operation
110431
19 / 26
EN
1. If a cutlery piece is stuck in the
appliance and it blocks the transport
channel, open the appliance cover.
As soon as the cover is opened, a micro-
switch in the cover disconnects the motor
and heating element.
2. Remove the cover of the transport
channel to diagnose the malfunction and
troubleshoot it (Fig. 10).
Fig. 10
3. Reinstall removed elements, close the cover and continue the drying process.
Switching the Appliance Off
1. If the appliance is not to be used any more, it should be switched off with the
START/END
key.
The appliance continues to work for approx. 10 min. and dries the granulate. As
soon as the time elapses, the appliance switches off.
2. Unplug the appliance.
Maize Granulate Replacement
ATTENTION!
Electronic counter counts the operating hours of the appliance. After
reaching the number of operating hours set by the manufacturer, alarm
indicator lights start flashing (see section 7 'Possible Malfunction'), which
signal a need to replace the maize granulate.
A warning light remains active in stand-by mode of the appliance, until
resetting of the hour counter. The fact that the set number of operating
hours is reached does not block further operation of the appliance.
