background image

Installation and operation  

 

 

100083   

 

 

11 / 19 

EN 

•  Keep minimum distance from walls and objects; maintain clearance of 15 cm at 

both sides and at the rear, and 20 cm over the appliance. 

•  The appliance should be installed only in rooms, in which ambient temperature 

falls in the range of 10°C 

– 32 °C. 

 

 

Power supply connection 

•  Verify if technical data of the appliance (see rating plate) correspond with the 

local electric power grid specification. 

•  Connect the appliance to a single, properly grounded mains socket with 

protective contact. Do not connect the appliance to a multi-socket. 

•  The power cord should be laid in a way preventing anyone from threading on it 

or tripping against it. 

 

 

•  If in winter the ice-cube maker is brought from the outside to a room, leave it for 

a few hours to heat up and reach the room temperature before switching it on. 

•  Before connecting the appliance to the power supply, wait 1 hour for the coolant 

to stabilize. 

•  After a power failure or when the plug is removed from the socket, reconnect the 

appliance to the power supply after 5 minutes at the earliest.  

 

• 

The el ectric  soc ket  s hould be  easil y  accessibl e s o it  is  pos sibl e t o quic kl y  disconnect t he  power c ord  when nec ess ar y.  

The el ectric  soc ket  s hould be  easil y  accessibl e s o it  is  pos sibl e t o quic kl y  disconnect t he  power c ord  when nec ess ar y.  

The el ectric  soc ket  s hould be  easil y  accessibl e s o it  is  pos sibl e t o quic kl y  disconnect t he  power c ord  when nec ess ar y.  

 

5.2

 

Operation 

 

 

Preparation of the Appliance 

1.  Prior to first operation, clean the appliance and its equipment according to 

instructions in section 

6 “Cleaning”

2.  Finally, dry the appliance and accessories thoroughly. 

3.  Insert the storage tank. 

4.  Remove the water tank lid. 

5.  Fill the water tank with fresh drinking water. 

NOTE: Do not fill with water the tank underneath the storage container. 

6.  Make sure the water level does not exceed the 'FULL' marking. 

7.  Place the lid on the water tank. 

 

 

Summary of Contents for 100083




















Reviews: