Possible Malfunctions
100083
15 / 19
EN
6. Using fresh water, conduct 1
–2 more production cycles, to remove all residues
of descaling solution.
CAUTION!
Dispose of the produced ice cubes; do not use them for cooling beverages
nor food products!
7. Once again drain water from the water tank.
8. Screw the closing cover onto the water drain.
7
Possible Malfunctions
Mögliche
The table below contains descriptions of possible causes and solutions to
malfunctions or errors during operation of the appliance. When malfunction cannot
be removed, contact the technical service.
Error
Possible Cause
Solution
The 'Add Water'
indicator light is lit.
No water.
Stop the appliance. Fill the
water tank with fresh
drinking water, up to the
'FULL' marking. Press the
ON/OFF switch to restart
the appliance.
The 'FULL ICE'
indicator light is lit.
There is too much ice in the
storage container.
Take the ice out of the
storage container.
Summary of Contents for 100083
Page 1: ...W150 100083 ...
