On
On
Off
Group 3
Magenta
8
Off
Off
On
Group 4
Orange
2
On
Off
On
Group 5
Light Blue
6
Off
On
On
Group 6
Yellow
3
On
On
On
Group 7
Red
1
Remark: The colour „indigo“ with index 5 is not available by design.
Important: All changes of the DIP switches are recognised only after reset or power on!
Colour Tables - „Cold- and Warm Colours“
Remark about the indices of the starting colours: The Chromoflex modules synthesise the colours by
look-up tables. These tables can be changed by the PC software „XeroFlex Editor“. So it is no problem
to i.e. remove all „cold“ colours from the colour maps (or vice versa). Or it is easy to remove unwanted
colours (keyword „corporate colours“).
These effects use the colour tables (2 are available):
Effect 1:
Standard colour chonge (table 1)
Effect 2:
Slow (soft) colour change each 30-180 Seconds (table 1)
Effect 3:
Randomly faded colours „Blob“ (table 1)
Effect 4:
User colour change (default is red-green-blue, table 2)
Effect 5:
Randomly changed colours „LSD“ (table 1)
Effect 8:
Randomly coloured flashes („Burst“) (tabele 1)
Infrared-Remote-Control - Installation
For controlling one ore more modules (connected as a network) also the infrared control can be used.
Only one single module within a network should be equipped with a infrared receiver. The receiving
module will forward any received commands to the network.
Important: If more than one infrared receiver is used, communication problems may occur. It is only
acceptable to use more than one receiver, if the receivers are totally independent (i.e. If located in
different rooms).
Important: In some rare cases it is possible, that other devices (TV, Video, ...) might react to the
Chromoflex infrared control (or vice versa). In such cases please separate the optical paths.
Chromoflex module with (plugged) receiver Module with extended cable (abt. 20 cm)
If required the cable to for the infrared receiver can be extended up to 20-100 cm. For lengths longer
than 20 cm a shielded cable is recommended. The shield can be connected to the free pin of the
receiver’s socket. If touching electronic parts, please regard the common known handling instructions
for electrostatic sensitive devices (ESD). Please discharge yourself.
Chromoflex - Manual - English V1.07
- www.barthelme.de
Rev. 02.07.2006
- 9 -
