11
Programming
For programming the Mini-PLC please refer to the
BARTH
®
-Programming Templates which are delivered
with each compiler software tool Programming the
Mini-PLC with a user program can cause a changing
electrical behaviour! Therefore, pay attention to the
electrical specifications before creating a program
which is stored in the Mini-PLCs data memory
Program the Mini-PLC using a programmer provided
and released by BARTH
®
Disregarding may cause mal-
function or irreversible damage of the Mini-PLC
Connection Table
Stecker
Funktion
X1
1
Supply V7..32 VDC
2
Supply Voltage 0V (GND)
3
Input 0-10 VDC (ref. GND)
4
GND
5
IN1 (switch, button, potentiometer, ref.
GND)
6
GND
7
IN2 (switch, button, potentiometer, to GND)
8
GND
9
Relay Output (bistable, 1A)
10
Relay Output (bistable, 1A)
X2
1
N (Neutral wire, internally wired with X2.2)*
2
N (Neutral wire, internally wired with X2.1)*
3
L‘ (Load Output)*
4
L (Mains Input)*
X3
1
+5 VDC**
2
GND**
3
VPP**
4
PGC**
5
PGD**
* external fusing 5 A
** MICROCHIP® ISP-Interface
Connection Layout