SURFACE PREPARATION SYSTEM OWNER’S MANUAL & PARTS BOOK
BARTELL MORRISON INC.
BARTELL MORRISON (USA) LLC
375 ANNAGEM BLVD, MISSISSAUGA, ONTARIO, CANADA, L5T 3A7, 905-364-4200 FAX 905-364-4201
25 INDUSTRIAL DRIVE, KEYPORT, NEW JERSEY, USA, 07735, 732-566-5400 FAX 732-566-5444
- 4 -
QUALITY ASSURANCE / MACHINE BREAK IN
The Bartell Surface Preparation System is the product of extensive engineering
development designed to give long life and unmatched performance. The SPS’s are
shipped completely assembled with the exception of attaching the handle, and only
require filling with fuel and a brief check of lubricant levels in preparation for operation.
You can help ensure that your Surface Preparation machine will perform at top levels by
observing a simple routing on first use. Consider that your new SPS is like a new car.
Just as you would break in a new car to the road or any new machine to the job, you
should start gradually and build up to full use. Learn what your machine can do and how
it will respond. Refer to the engine manufacturer’s manual for run-in times. Full throttle
and control may be used after this time period, as allowed by material. This will serve to
further break in the machine on your specific application, as well as provide you with
additional practice using the machine.
We thank you for the confidence you have placed in us by purchasing a Bartell Surface
Preparation System and wish you many years of satisfied use.
