background image

Bartell Morrison Inc.

375 Annagem Blvd., Mississauga, ON, Canada

Toll Free - 866-501-1683

Bartell Morrison (USA) LLC
12 Industrial Dr., Mississauga, NJ, USA
Toll Free - 888-999-1570

19

Warranty:

A warranty claim will not be valid unless a written claim authorization comes with returned parts. 

The manufacturer/distributor will not provide for any shipping costs for items returned for repair. 

To obtain warranty repairs, buyer must prepay shipment and return all warranty parts to the 

manufacturer/distributor. Damage occurring during shipment is deemed the responsibility of the 

carrier and claims should be made directly with such carrier.

It will be the customer’s responsibility to pay for any non-warranty replacement parts plus the 

current hourly labor rates for any work done on any machine or part. Service is available upon 

request; call Bartell Morrison Inc for current labor rates.

WARRANTY SERVICE

This machine is warranted to original retail purchaser of the equipment:

A. Limited Warranty. The equipment, when first delivered, will conform to the specifications set forth in 

the Owner’s Manual and will be without defect in material or workmanship.

For a period of one (1) year after delivery to the original retail purchaser, or 500 clock hours of operation, 

whichever occurs first; or in the case of replacement parts other than belts, for a period of ninety (90) 

days after the part is installed or within the warranty period described above, whichever is later, if the 

original retail purchaser notifies the manufacturer/distributor (either directly or through one an authorized 

dealer) of a defect in material or workmanship or of a non-conformity to the specifications, then, upon 

confirmation of the defect of non-conformity and confirmation that the defect or nonconformity is covered 

within these Limited Warranty conditions, the manufacturer/distributor will, at it’s election and at it’s ex

-

pense, either (i) repair or correct the defect and/or non-conformity, or (ii) replace the part.

B. Limitations. This Limited Warranty does not apply to damage caused by (i) misuse of the equipment 

including, with limitation, use of the wrong power source, striking an imbedded object such as a bolt, 

electrical outlet box, expansion joint or steel reinforcing rod; or (ii) unauthorized alteration, modification, 

repair or tampering; or (iii) use of replacement parts not supplied by the manufacturer/distributor; or (iv) 

normal wear, discoloration, surface corrosion, deterioration of finishes or paint surfaces, or (v) other ap

-

pearance deterioration caused primarily by use. The manufacturer/distributor shall not be responsible and 

this Limited Warranty shall not apply to damage caused by improper maintenance or failure to inspect and 

maintain the equipment as recommended in the Owner’s Manual.

C. Belts. The equipment, when shipped from the factory is equipped with a spare Upper Drive Belt and the 

Upper Drive Belt is, therefore, not a covered item under the terms of this Limited Warranty. The Lower 

Drive Belt is covered as set out at paragraph A., above, but for the period of six (6) months after delivery 

of 250 clock hours of operation, whichever occurs first.

D. Transportation. Purchaser will pay the cost of transporting defective or non-conforming parts to INNO

-

VATECH and the cost of returning repaired or replacement parts to purchaser. Each party will safely pack-

age the parts it sends to the other in accordance with good commercial practice. If purchaser requests and 

the manufacturer/distributor agrees, the covered warranty work may be performed where the equipment 

is located. If the manufacturer/distributor performs the work at the location, purchaser will pay the cost of 

business class transportation and good quality meals and lodging for the technicians.

E. Abuse. THE MANUFACTURER/DISTRIBUTOR IS NOT RESPONSIBLE FOR DAMAGE, DEFECT, BREAKAGE 

OR MALFUNCTION OF THE EQUIPMENT THAT IS CAUSED BY ABUSE OR BY OPERATION OF THE EQUIP-

MENT IN A MANNER WHICH IS NOT RECOMMENDED OR APPROVED BY THE MANUFACTURER.

F. Exclusive Warranty. EXCEPT AS IS EXPRESSLY SET OUT IN THE THIS LIMITED WARRANTY: (i) THE 

MANUFACTURER/DISTRIBUTOR MAKES NO PROMISE OR WARRANTY, EXPRESSED OR IMPLIED, WITH RE

-

SPECT TO THE EQUIPMENT; (ii) THE MANUFACTURER/DISTRIBUTOR MAKES NO PROMISE OR WARRANTY 

THAT THE EQUIPMENT IS FIT FOR ANY PARTICULAR PURPOSE; (iii) THE MANUFACTURER/DISTRIBUTOR 

WILL HAVE NO OBLIGATION OR LIABILITY TO THE PURCHASER OR TO ANY THIRD PARTY WITH FOR ANY 

DAMAGE CAUSED BY THE EQUIPMENT OR AS A RESULT OR CONSEQUENCE OF ANY CLAIMED DEFECT 

IN THE EQUIPMENT, ANY FAILURE TO WARN OR NOTIFY, OR ANY CLAIMED NON-CONFORMITY TO THE 

SPECIFICATIONS; AND (iv) PURCHASER WILL HAVE NO OTHER REMEDIES IN RESPECT OF SUCH DEFECT, 

NON-CONFORMITY, DAMAGE OR CONDITION EXCEPT THOSE SET OUT IN THIS LIMITED WARRANTY.

WITHOUT LIMITING THE FOREGOING, AND REGARDLESS OF THE CIRCUMSTANCES AND EVEN IF A REM-

EDY FAILS, THE MANUFACTURER/DISTRIBUTOR WILL HAVE NO LIABILITY TO THE PURCHASER OR TO 

ANY THIRD PARTY FOR (i) LOSS OF REVENUE OR PROFITS, OR (ii) FOR INCIDENTAL, CONSEQUENTIAL OR 

PUNITIVE DAMAGES.

Summary of Contents for P-2400





















Reviews: