375 ANNAGEM BLVD., MISSISSAUGA, ONTARIO, CANADA, L5T 3A7, 905-364-4200 FAX 905-364-4201
200 COMMERCE DRIVE, FREEHOLD, NEW JERSEY, USA, 07728, 732-566-6400 FAX 732-566-5444
CREATED: 07/04
REVISED: 06/14
BXR836 RIDE-ON TROWEL INSTRUCTION MANUAL
BARTELL MORRISON INC.
BARTELL MORRISON (USA) LLC
375 ANNAGEM BLVD. – MISSISSAUGA – ONTARIO – CANADA – L5T 3A7 – 866-501-1683 – FAX 905-364-4200
25 INDUSTRIAL DR. – KEYPORT – NEW JERSEY – USA – 07735 – 888-999-1570 – FAX 732-566-5444
Created: 05/2012
Revised: 00
Revised: 05/2012
7
Routine Service Intervals
- Continued -
Each
use
After 1.5
months
or
50 hrs
Each 3
months
or
100 hrs
Each 6
months
or
200 hrs
Each 9
months
or
300 hrs
Each 12
months
or
400 hrs
Drive Train:
Bearings
Lubricate
o
o
o
o
o
o
Universal couplings
Lubricate
o
o
o
o
Belt tension / Condition
Check
o
o
o
o
o
o
Clutch / Pulley operation
Check
o
o
o
o
o
o
Check
o
o
o
o
o
LH spider plate assembly
Lubricate
o
o
o
o
o
o
Check
o
o
o
o
o
RH spider plate assembly
Lubricate
o
o
o
o
o
o
Gearboxes:
Check Level
o
o
o
o
o
o
LH Gearbox oil
Change
o
o
Check Level
o
o
o
o
o
o
RH Gearbox oil
Change
o
o
Gearbox breathers
Check operation
o
o
o
o
Retardant Spray System:
Water pump operation
Check
o
o
o
o
o
o
Spray nozzles
Clean
o
Retardant Fluid
Check levels
o
Due to the nature and environment of use, power trowels are exposed to severe operating conditions.
Some general maintenance guidelines will extend the useful life of your trowel.
•
The initial service for your power trowel should be performed after 25 hours of use, at which time your
mechanic (or authorized repair shop) should complete all of the recommended checks in the schedule
above. The chart on page 6 (six) is handy for keeping a record of the maintenance performed and the parts
used for servicing your trowel.
•
Regular service according to the schedule above will prolong the life of the power trowel and prevent
expensive repairs.
•
Keeping your power trowel clean and free from concrete residue is the single most important regular
maintenance operation, over and above the checks in the service schedule above, that can be performed.
Components such as oil seals, belts, drive line parts and bearings are prone to premature wear from
exposure to concrete residue. Using a spray-on release agent on your power trowel before each use will
make clean-up after use easy and extend the time between replacement of most of the wearing components
of the machine.
•
After each use your power trowel should be cleaned to remove any concrete residue from the undercarriage
and surrounding components. Use of a power washer will make clean up quick and easy, especially if a
release agent was applied prior to use.
•
In the Service Schedule above, items that should be checked, replaced or adjusted are indicated by “o” in
the appropriate column. Not all power trowel models include the same features and options and as such not
all service operations may have to be performed. For ease of recording place a checkmark (
√
) through the
“o” when the item is complete. If an item is not required or not completed place an “x” through the “o” in the
box.
•
For all fuel-line powered trowels the governed speed of the engine is 2000 to 3600 rpm. See engine
manufacturer’s manual for exact specifications. Care should be used when making any adjustments to the
power trowel not to change the governed speed. Increasing the governed speed of the engine may lead to
premature failure and void the manufacturer’s warranty.
•
Failure to have your power trowel regularly serviced and properly maintained in accordance with the
manufacturer’s instructions will lead to premature failure and void the warranty.
7
Summary of Contents for BXR836
