BSM1402 MASONRY SAW
OI
– B19042
OWNER
’S MANUAL
26
Check the receiving flange and
have it replaced if necessary
Saw blade show s blooming colors
Saw blade overheating due to a
lack of cooling w ater
Ensure an optimum flow of
cooling w ater
Lateral friction w hen cutting
The material feed is too high;
proceed more slow ly
Grinding marks on the saw blade
Material is not being fed parallel
to the saw blade
Ensure that the direction of feed
is absolutely parallel to the saw
blade
Adjust the roller table or have it
adjusted
Poor tension in the blade material
Have the saw blade tensioned
Too much load on the saw blade
The material feed is too high,
proceed more slow ly
