BSM1402 MASONRY SAW
OI
– B19042
OWNER
’S MANUAL
25
Shaft of motor causes w obbling
Have bearings of the motor or the
motor replaced
Overheating
Ensure optimum flow of cooling
w ater
Cracks in or near the diamond
segment
Saw blade too hard
Use a softer blade
Fixed flange is w orn out
Replace the fixed flange
Motor shaft bearing
Replace the bearing of the motor
shaft
Problem
Possible Cause
Solution
Saw blade is blunt
Saw blade type is unsuitable for
the material being cut
Use appropriate type of saw
blade
Saw blade type is unsuitable for
the machine performance
Saw blade too hard
Diamond segments are blunt
Sharpen the diamond saw blade
Appearance of cut is not optimal
Poor tension in the blade material
Return the saw blade to the
manufacturer
Too much load placed on the saw
blade
Use a suitable saw blade
Diamond segments are blunt
Sharpen the saw blade
The center hole in the saw blade
has become w ider due to w ear
The saw blade has slipped on the
motor shaft w hen running
The arbor of the saw blade must
be fitted w ith an appropriate
adaptor ring
