Bartell BG2800, Owner'S Manual

Page: 15 / 36

BG2800, BG5000, BG7000E OIPB-B19052
OWNER’S MANUAL
14
AC Application
1. Start the generator
2. Connect the appliances
3. Turn on the main breaker
DC Application
15. The DC terminal may be used for charging 12V automotive-type batteries only.
16. When using automotive-type batteries with cables, be sure to disconnect the negative
cable from the battery before charging.
17. Connect the charging cable to the battery terminals and the DC terminal of the
generator.
18. Connect the positive battery terminal to the positive generator terminal.
19. Do not reverse the charging cables, or serious damage to the generator and/or battery
may occur.
20. Do not allow the free ends of the cables to touch, as it can short circuit the battery.
21. When a large capacity battery is charged, excessive current flows (depending on the
discharge condition), can cause the fuse for the DC current to burn out.
22. Batteries produce explosive gases. Keep sparks flames and cigarettes well away.
23. To prevent the possibility of creating a spark near the battery, always connecting
charging cables to the battery first and then only to the generator. When disconnecting,
remove the cables at the generator end first.
24. Charge the battery in a well-ventilated place.
25. Before charging, remove the cap from each cell of the battery. Discontinue charging if
the electrolyte temperature exceeds 45C.