POLARIS PROFESSIONAL
- for Zone 2 / 22
POLARIS Panel PC Professional 15" up to 24"
Installation
Technical data subject to change without notice.
08/2019
27/66
5.2.3
Table mounting swivel/tilt (Stainless steel enclosure "Exclusive II")
CAUTION
Movable enclosure parts on the swivel-mounted enclosure.
There is a risk of injury by hands being crushed.
3 people are needed for assembly/disassembly.
When lifting the POLARIS, always pick up the swivel-mounted adapter and
enclosure together.
Hold up the POLARIS on both sides (two people), so that the third person can
lay the supply and data line(s) in the supporting system. Make sure that your
fingers do not get caught between the swivel adapter and the enclosure as you
set up the POLARIS.
Illustration 12: Drilling pattern - supporting system for table mounting
Rotating
The POLARIS is fixed using two side
T screws.
The angle of rotation can be changed
once the screws have been loosened
Inclining
The POLARIS is fixed on the carrier
system using two hexagon socket screws
M10 and a T screw.
The angle of rotation can be changed
once the screws have been loosened.
Tools: hex key 5 mm
Summary of Contents for POLARIS B7-72V1 Series
Page 6: ...blank...