Bartec Pegasus 7100, User Manual, Page: 50 / 68

Phonebook Software
Installation PEGASUS 71xx series
42/47
Technical data subject to change without notice.
09-2011
Man-down notification
The man-down alarm can be adjusted in three different notification modes.
- Call
- Call and SMS
-
Call and Position Link
Remark:
"Call and SMS"
The transmitted SMS is displaying the text "Man-down" and will only be sent to the first
defined number in the man-down number list. If the PEGASUS has received GPS data
the last captured position data will be sent too.
"Call and Position Link"
If the PEGASUS has received GPS data, a Google map link to the last captured position
data will be sent as a text message. If the receiver phone supports internet, you can
display the man-down position directly on the Google map.
To transmit settings to the device press button
"send to device" button.
Make sure "Activate man-down functionality" is ticked.
Note
Further details on the man-down function can be found in the PEGASUS manual.
Important notes on the man-down functions
Attention!
Please use the same provider for man-down and emergency numbers as for PEGASUS
to prevent delays during dialling. Make sure also that your provider supports the service.
It must be pointed out and ensured that all (!) mailboxes, voice mails and automatic
answering systems for the call numbers in the alarm chain are turned off because the
first call acceptance stops the alarm chain.
The alarm can’t be cancelled from the PEGASUS if alarm is triggered! Before each use
of this function the user must conduct a general test for correct functioning.
BARTEC is not responsible or liable for this purpose.