Bartec MC 75A6exHF-NI, User Manual

Page: 48 / 72

Operation
Mobile Computer MC 75Ax ex -NI and MC 75A6 ex HF-NI
Type B7-A27.-…………
42/58
Subject to technical changes.
04/2015
FCC requirements to protect against high-frequency interference
This device has been tested and satisfies the limit values for a digital device of Class B
according to Part 15 of the FCC Guideline. These limit values were stipulated to
guarantee appropriate protection against disturbances if the device is used in residential
areas. The device generates and uses radio frequency energy and may emit this
energy. This can have a disturbing effect on other radio frequencies if the device is not
connected and used in accordance with the operating instructions. A guarantee that no
interference will arise for a certain installation cannot be given. If the device causes
interference to the radio or TV reception which can be recognised by switching the
device on and off, the interference should be eliminated by one or several of the
following measures:
−
Re-alignment or moving of the receiving antenna
−
Enlarging the distance between device and receiver
−
Connecting the device to a different socket than the one to which the receiver is
connected
−
Advice from the dealer or a radio/television technician
Radio transmission devices (Part 15)
This device satisfies the requirements of Part 15 of the FCC Guidelines. The operation of
the device is based on the following two conditions:
−
The device may not cause any damaging interference
−
The device must absorb all receiving interference including interference which may
lead to undesirable operation.
Requirements placed on the protection from high frequency interference - Canada
This digital device of Class B satisfies the Guidelines of the Canadian standard ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Radio transmission devices
This device corresponds to RSS 210 (Industry & Science Canada). The operation of the
device is based on the following two conditions:
−
The device may not cause any damaging interference
−
The device must absorb all receiving interference including interference which may
lead to undesirable operation.
Label symbol: “IC:” before the radio certification means that the technical data of Industry
Canada have been satisfied.