Transport and storage
Ex p Control Unit
SIEMENS Set
Page 24 of 80
01-37A2-7D0004_SIEMENS_Manual_Exp-Control-Unit_20220216_0_en.docx
Rev. 0
Disclaimer: We reserve the right to make technical changes. Changes, errors and printing errors do not justify claims for damages.
Transport
WARNING
DEATH OR RISK OF INJURY FROM FALLING HEAVY SUSPENDED LOADS.
Never stand under suspended loads.
Secure the Ex p control unit before transport using suitable fastening
(e.g. straps)
ATTENTION
AVOID HARD IMPACTS, E.G. BY FALLING DOWN OR SETTING DOWN TOO
VIGOROUSLY.
The Ex p control unit may be damaged.
Only use hoists and load handling attachments with sufficient load
bearing capacity.
The permissible lifting weight of a lifting device may not be exceeded.
Slowly set down the control unit.
Observe the weight of the goods to be transported and select an adequate
transport device.
Storage
Store the control unit in a horizontal position and at a temperature of -20 °C to
+40 °C in its original packaging. The environment must be dry, dust-free and low
vibration.
Store the control unit for a maximum of 2 years.
For warehouse logistics, we recommend the “first in – first out” principle.
Disposal
Observe the applicable national regulations for disposal
Dispose of the control unit at the designated disposal points.
