DBL Operation
Low Power Indicator
The LED labeled POWER lights RED when the battery needs to be replaced.
Using the DBL
The process of using the DBL is one simple operation of holding the tool over the sensor
and pressing the test button down. When the TEST button is pressed the green TPMS
light will come on and stay a solid green color until a signal is received from the sensor in
the wheel, or the cycle time ends. The DBL will first attempt to activate Ford 06 sensor
types, followed by the activation of Schrader. Please be patient while holding the DBL in
position as read attempts occur for the various sensor types.
Successful Read
When the test tool reads the sensor correctly the green TPM light will flash and an
audible sound will be emitted.
Unsuccessful Read
The sensor in the wheel was not activated if the TPMS light does not flash, no audible
signal is heard and the TPMS light then turns off.
Summary of Contents for DBL TPMS
Page 1: ...DBL TPMS Hand Held Tool ...
