Typ 07-351*-**************
5
Position Selector Switch
Label
Accessories, Spare Parts
See also BARTEC catalogue.
Disposal
The ComEx control and indicating device components (actuators,
switching modules, luminous modules, enclosure) contain metal
and plastic parts. Therefore the statutory requirements for
disposing of electronic scrap must be observed (e.g. disposal by
an approved disposal company).
Service Address
BARTEC GmbH
Max-Eyth-Str. 16
97980 Bad Mergentheim
Germany
Tel.: +49 7931 597 0
Fax: +49 7931 597 119
– If the actuating element being fitted is a position selector
switch, make sure its actuating pins are in alignment over the
metal plungers on the switch module (9).
– Engrave or inscribe the labels (10) manually.
– Stuck the labels into the recess (11) provided in the enclosure
cover.
Actuating Element
– With its projecting latch positioned correctly, insert each
actuating element (5) into the hole in the enclosure cover
(6) and secure it in place with the retaining nut (7) using the
wrench (8) (2.8 – 3.4 Nm). Please see Manual of actuating
elements 05-0003-00../….
NOTE
The position of the built-in devices must agree with the
actuating element used.
5
6
7
8
10
11
9
01-3511-7D0002-A-05/2020-ESS-409352
