Operation
Barcode Hand Scanner
BCS 160
ex
Series, Type 17-21BA-M31S/…….. and 17-21BA-M32S/……..
38/48
Technical data subject to change without notice.
Revision A / Status: 01/2014
6.3.2
Cleaning
DANGER
There is a risk of a fatal injury in hazardous areas!
Clean the devices or the accessories only outside the hazardous area.
ATTENTION
Devices and accessories can be destroyed if handled inappropriately.
For your own safety and to ensure that the device will operate reliably:
In general, disconnect the charging station from the power supply.
Disconnect the cable plug connector from the power supply.
Remove the battery before cleaning the contacts.
There must not be any residues, e.g. fluff, sticking to the contacts.
There may not be any moisture left on the contacts.
When drying with compressed air, comply with the safety regulations.
6.3.3
Suitable Materials
−
Alcohol cleaning wipes
−
Lens cleaning wipes
−
Cleaning cotton buds
−
Isopropyl
−
Compressed-air spray with hose
Enclosure
−
with alcohol cleaning wipes
Scan window
−
Means of cleaning for optical devices
Battery
Contacts
Take the battery out of the device before starting to clean.
−
Dip the cleaning cotton buds in the alcohol solution to remove
all deposits of grease and dirt on the contacts.
−
Repeat cleaning several times.
Before you insert the battery, make sure the contacts are
completely dry and that there is no fluff sticking to them.
Summary of Contents for 17-21BA-M31S Series
Page 2: ......
Page 6: ...Blank...
