01
-7331
-7D
001
2
/ V
er
sion:
A
15.
02
2
022
/ 40
5499
Operation Instruction (Translation)
MODEX
Regulating and control components
PROFIBUS-Interface 16 x digital out Ex i
Type 07-7331-2305/1000 or 1100
PROFIBUS-Interface 16 NAMUR in (16 x digital in Ex i)
Type 07-7331-2303/0000 (Standard) or 1000 (Inverted)
DE
GmbH
Max-Eyth-Straße 16
97980 Bad Mergentheim
Deutschland
Tel.: +49 7931 597-0
Fax: +49 7931 597-119
Vorbehalt
Technische Änderungen behalten wir uns vor.
Änderungen, Irrtümer und Druckfehler begründen
keinen Anspruch auf Schadensersatz.
9/28
10.
Troubleshooting
Please check the following points if problems arise when setting
up a connection:
11.
Have you paid attention to the LED messages?
12.
Check wiring and connections.
13.
Is the connection between the controller and terminal device
correct?
14.
Have all screw terminals been correctly tightened?
15.
Has the correct baud rate been set?
16.
Is the transmission path too long for the selected baud rate?
17.
Have all addresses been set correctly?
18.
Has the system been restarted since last changing the bus
addresses? The devices are initialised after each restart.
19.
Has the bus been correctly set (last module) and the jumper
set correctly?
20.
Heed the guidelines for individual assemblies in the software.
11.
Maintenance, Inspection, Repair
Only authorised and qualified personnel may do any work on the
control and regulating component.
Maintenance
If operated correctly in accordance with the installation instructions
and ambient conditions, it does not require maintenance.
Inspection
Under EN/IEC 60079-17 and EN/IEC 60079-19 the owner/
managing operator of electric installations in hazardous areas is
obliged to have these installations checked by a qualified
electrician to ensure that they are in a proper condition.
Repair
The component must not be repaired. Please contact BARTEC
GmbH if you have any questions.
12.
Disposal
The regulating and control components contain metallic, plastic
and electronic parts.
WEEE-Reg.-No. of the BARTEC GmbH:
DE 95940350
Our devices involve electrical equipment which is only
intended for commercial use (so-called B2B equipment in
accordance with the WEEE Directive).
The regulating and control components must be disposed
of in accordance with national regulations.
Our customers may return any products procured from us
to our company for disposal. The sender must bear the
costs for shipping/packing.
13.
Amendments to the Document
In cases of doubt the German safety instructions apply because it
is not possible to rule out errors during printing and translation. The
"General Terms and Conditions of Business" of the BARTEC
Group moreover apply in the event of legal disputes.
The current version of data sheets, operating instructions,
certificates and EC declarations of conformity can be downloaded
from
or directly requested from BARTEC GmbH.
14.
Order Numbers
PROFIBUS Interface
16 x digital out Ex i
Order no.
07-7331-2301/0000 or 1100
PROFIBUS Interface
16 NAMUR in (16 x
digital in Ex i)
Order no.
07-7331-2303/0000 (Standard) or 1000 (Inverted)
15.
Service Address
BARTEC GmbH
Max-Eyth-Straße 16
97980 Bad Mergentheim
GERMANY
Phone
+49 7931 597-0
Fax
+49 7931 597-119
E-Mail:
Internet:
