background image

LHB

INSTALLATION INSTRUCTIONS

800.533.3948 • www.barronltg.com 

3

20070092 REV 3 - 08/17

TROUBLE SHOOTING

LHB does not turn “ON”

1. Check incoming voltage to LED driver. Must be at least a minimum of 120VAC and no greater than 277VAC.

2. Are all the LEDs on the light engine “OFF”? If so, LED driver may be defective. Using a voltmeter, check to see if 

   voltage is present at the output of power supply. If low or no voltage, then replace power supply.

3. If any individual LEDs are “OFF” the LED light engine is defective. Please have the serial number off the light engine 

    available when you contact technical support.

   

Reviews: