LHB
INSTALLATION INSTRUCTIONS
800.533.3948 • www.barronltg.com
2
20070092 REV 3 - 08/17
Wire Guard Installation
1. Place fixture on flat surface with modules opening facing upwards.
2. Slant wire guard at a 45° angle and place one edge to the opening of the
LED module frame.
3. Slightly press opposite edge of wire guard down to lock the clips into place.
Diffused Lens Installation
Option 1: Slide lens
1. Loosen LED module frame by removing 2 screws from side that does not
contain wires.
2. Slide diffused lens into LED module frame, ensure glossy side is facing
outward.
3. Secure LED module by retightening 2 screws.
Option 2: Snap in lens
1. Align diffused lens along length of LED module frame, ensure glossy side
is facing outward.
2. Squeeze diffused lens slightly to align inside LED module frame.
3. Release in place.
5512
5533
5535
5504
Clips
Lens
