Installation, Continued
6. Remove the transformer compartment cover and make electrical connections. Electrical connections should be made
inside the transformer compartment. Make electrical connection as follows (Fig. 6):
120VAC
277VAC
White - Common
White - Common
Black - 120VAC
Orange - 277VAC
Green - Ground
Green - Ground
Note:
Cap unused leads to prevent shorting.
7. Replace the compartment cover and secure in place with (1) #6-32 x 1/4” screw.
8. Verify connections are in place, such as lamps, LED, and test button.
9. Replace the enclosure cover and secure in place with the cover screws.
10. Open the battery door by unscrewing the captive thumb screw. (Fig. 7)
11. Connect the battery and close the battery door.
12. Secure the battery door in place by retightening the thumb screw.
13. Cut the ceiling tile to correct size, as needed. (Fig. 8)
Transformer
Compartment
Cover
#6 x 1/4”
Screw
Battery
Door
Battery
Connector
LED
Indicator
Test Button
Fig. 6
Fig. 7
Fig. 8
10070166
R
EV 7 - 08/22
3
800-533-3948 www.barronltg.com
CRL Series
Installation Instructions
