Timberman
Instruction Manual
7
For assistance call: +
1.716. 866-0054
Assembly – Step
A
Assemble the Unit
Unpack Timberman and parts from box and remove plastic wrap
There are two L-shaped wood spacers (one on
each side of the cabinet) that are
only for
shipping & protection purposes
. They both may
be discarded after unboxing.
Do not discard the flat notched board
.
There is a wood board that needs to be installed
from underneath the unit (accessed via the rear
opening) with two (2) metal brackets.
To Install the Notched Wooden Board Protector Cover
This wood board protector sits in the space
between the front of the unit and below the
speaker/screen.
It is secured by two (2) metal mounting brackets,
six (6) wood screws and six (6) tapping screws.
1.
To begin, you will need the included two (2) metal
mounting brackets and six (6) wood screws. Don’t
panic: extra screws may have been provided.
2.
Screw the brackets into the middle of the shorter edge
of the board. Mount the bracket on the side where
the cover edges are rounded.
These screws will be flush with the bracket once
installed.
Summary of Contents for Timberman
Page 32: ......
